Furniture stores Kitchener: If you’re looking to restore wood patio furniture, many options are available. You can strip it back down to the bare wood or refinish it to match or contrast with your other furniture pieces. These tips and tricks make restoring wood patio furniture easy and enjoyable.
Wood Patio Furniture Maintenance Tips
You may have heard of wicker furniture, rattan, and cane, but did you know that there is a type of outdoor or patio furniture made from wood that’s becoming popular? It’s a beautiful choice for your deck or backyard area. As with any furniture, it must be maintained properly to remain in good condition. Over time, UV rays and moisture can damage untreated or improperly treated wood furniture. If you want your wood to look its best for years, follow these tips
1. Choose high-quality wood: This will give you a better chance of preserving your investment over time. Look for high-quality hardwoods such as teak, cedar, mahogany, and redwood. The higher quality woods are more durable than softwoods like pine and fir when exposed to sun and rain.
Hardwoods also last longer than softwoods because they don’t absorb water easily like softer woods. They are also less likely to warp or crack when exposed to sunlight. If you are interested to get the good quality furniture visit payless furniture.
2. Apply regular coatings: Regular protective coating ensures a long life for your patio furniture. Most experts recommend using a clear finish, which protects against sun exposure and weathering while enhancing the natural beauty of wood. Clear finishes come in many forms, including liquid, oil-based varnish, lacquer, and shellac coats.
3. Reapply coats after each cleaning: Reapply protective coating to maintain shine and durability of finish until next season arrives.
Avoid using harsh chemicals on your wood furniture
Not only will it damage your piece, but it’s also not safe for you or your family. Most of these products use chemicals like formaldehyde and ammonia to produce a lustrous shine and make quick work of grime, stains, and mildew. Unfortunately, they can wreak havoc on your health—particularly if you have asthma or allergies. Look for something more natural like orange oil to clean things up—it’s easy for you and your furniture!
Tools you should invest in
You can get a random orbital sander that is perfect for taking away most of your high spots. This will also remove dust and make your finish look nicer. Next, you should consider sanding the sealer. You can use an oil- or water-based version but choose carefully because specific applications work best with each type.
After applying two coats of sealing wax to your patio furniture, it’s time to add some color! To do so, you’ll need excellent outdoor spray paint in one or more colors of your choice; we recommend Krylon Fusion for its durability and variety of finishes (matte, satin, semi-gloss). With everything ready, prep and paint as desired!
Step 1 – Cleaning Wood Furniture
Cleaning is a crucial first step in refinishing your wood patio furniture. You want to remove all dust, dirt, and debris from your items using a mild soap or detergent mixed with warm water. Be sure not to use products containing ammonia or bleach, as they will eat away at any sealant that might be present on your furnishings.
Remove all hardware, like screws, and disassemble anything as it will make applying to paint much easier later. Allow everything you clean to dry thoroughly before moving on.
Step 2 – Stripping Off Old Paint or Stains
Even if your wicker is still intact, cleaning it may be necessary. Many of these items are covered in a layer of paint or varnish that has worn off over time. Stripping off all that old material will allow you to apply new stains and give your piece of furniture a fresh look again. (You can find commercial products for stripping material like stripper or WD-40, but be careful using these! They’re strong stuff, and you don’t want to damage anything you plan on keeping.)
Step 3 – Sanding and Sealing the Wood Furniture
Though it’s not necessary, sanding and sealing are usually recommended for restoring wooden patio furniture. Sanding removes paint, splinters, and dirt that can damage your furniture and increases a wood surface’s natural porosity so that stains, sealers, and paints absorb more effectively.
The three basic types of sandpaper (silicon carbide, aluminum oxide, and garnet) each have their strengths—use every kind on its corresponding type of finish: Abrasive silicon carbide paper should be used on glossy or plastic finishes because they are softer than aluminum oxide paper, which should be used on flat finishes. After all, it removes less wood than other abrasives. Use garnet paper when you want to smooth out any rough areas.
Step 4 – Applying Finish to the Wood Furniture
You have successfully stripped, sanded, and prepped your wooden furniture. Now is time for staining or finishing with a spray gun. Apply a thin coat of paint with a 1-inch sprayer.
After that dries, apply another coat if needed. An important thing to remember here is to ensure you do not put on too much paint because it will make it too heavy and might cause warping or cracking as well as uneven color.
How do you revive old patio furniture?
What better way to enjoy summer than with a delicious meal, great friends, and good music! Everyone can get involved, from fixing wooden deck furniture to painting or improving light sets. You may want to start by making sure you have all you need. For example, if you’re using oil-based paint, make sure that your deck surface is primed for it.
For surfaces like porcelain tiles, ensure they’re completely dry before starting work. Also, check what kind of paint it takes not to apply acrylics on plastic or vinyl tiles. After you know what materials and tools you need, take care of them well enough so they last longer through time – read through a basic guide on how to care for garden tools & equipment.
How can I make my patio furniture look new again?
There are many different ways you can clean your old patio set and make it look new again. Cleaning your furniture with a solution of water and vinegar can do wonders. You might even want to add some lemon juice or a few drops of oil into the mixture.
Remember that when trying to remove stains, you should always blot up excess liquid so that it doesn’t sit there and soak into your set, causing more damage than good. If possible, try using a cloth made of cotton or linen. These materials are perfect for absorbing any liquid without scratching surfaces or leaving behind lint, which will only get on your clothing while sitting out on your new-looking set.
Conclusion
Before beginning, be sure you have all of your tools and materials handy so that you don’t need to take a break mid-way through to look for them. Also, clean up any dust or dirt from furniture before starting work. In addition, if your patio has excessive mold and mildew, scrub it off using a mixture of vinegar and water before applying your finish.
